Cooling System
AMD Athlon
Page: 2
I am using 2 strong fan of SANYO. Cooling itself of CPU strengthened. However, this heat is discharged into the case of computer. The exhaust of the computer case is important. However, it increases noise to extend the exhaust fan. |
| Thereupon, I made an exhaust duct. It evacuates
it in the outside directly. The material
is the complex material of aluminum and cellulose.
Hahahaha, it is empty box of software. I
was used to attaching the sheet of aluminum.
|
| This is very strong. However, wind quantity
decreases when a case is closed. And even
the exhaust of the power supply becomes weak. This is insufficient an intake. I made several holes to a case and attached a filter. It is perfect. At the time of idling temperature of CPU is high 6C more the temperature of the surroundings. Even if the load causes high bench mark software run 3C over does not go up. ( It continuously tested it for more than 24 hours.) |
| And, this cooling system is heavy. I think that it is not good to hold this only with MB. I fixed it in a case with the metal fittings. Weight is linked to the frame. The detachment and attachment is easy with the bolt of the manual operation. (November 26, 1999) |
Page: 1<= or Return