Cooling System
AMD Athlon
| Default |
 |
 
|
| This is a standard cooling route. There is
the protrusion for L2 SRAM in the Thermalplate.
However, there are the opening of about 0.5mm.
Thick silicon grease is burying this opening. Step1 |
 |
 
|
| There was the person who failed to 500 to
550MHZ from overclock in the early period.
It did a stable action as it inserted thin
copperplate in the opening of L2 SRAM. It
acted with 600MHZ in the condition where
removed a cassette furthermore. This is insufficient the cooling of L2 SRAM. And it is insufficient the discharge of the heat in cassette inside. However, it is must divide Athlon for this. The photograph of the right is the pin that is fixing the case. There is cone form processing that hooks it in this. It is not able to restore it completely when remove a cassette. However, it is sufficient to fix in the Retension of MB. Step 2 |
 |
 
|
| This is my cooling system. Heatsink is Alpha-P125. There are adapter 3 kinds made of copper. I cut the stick of copper and adjusted thickness with sandpaper. Waterproof sandpaper is fixed in a plane. The easy plane is a mirror. I uses it to #240 to #2000. This work requires patience. However, the effect is great. The electricity insulation is necessary in the OLGA core and also the reverse side of PCB. |